This is the venerable, iconic Fuzz Face rendered on perfboard with axial components for that oh-so-mojo look. Two versions are included: one with a fixed bias resistor on Q2's collector, and the other wired for a bias pot control. If it were me, I'd build the version with the bias control, just for safety's sake. Also, if you do that, you'll basically have yourself a $un Face pedal, but for $30 instead of a couple hundred. But I'll leave that to the builder.
And here's a PCB transfer image (use the bias control layout above for parts placement). Print at 200 DPI.
Here's a build pic of the fixed-bias version: